EPDM mai wanki zinc plated din 7504 hex head hako sukurori

Takaitaccen Bayani:

Hex Head Self Drilling Screw

Sunan: EPDM Washer Zinc plated din 7504 hex head hako sukurori

●Material: Karfe Carbon C1022 , Case Harden

Nau'in kai: hex flange head.

Nau'in Zare: cikakken zaren, zaren partial

●Rashin hutu: Hexagonal ko ramin rami

● Ƙarshen saman: Farin Zinc mai launin fari da rawaya

Diamita: 8#(4.2mm),10#(4.8mm),12#(5.5mm),14#(6.3mm)

●Manufi: Hakowa da wurin bugawa

● Standard: Din 7504K

1.Low MOQ: Yana iya saduwa da kasuwancin ku sosai.

2.OEM Karɓa: Za mu iya samar da kowane akwatin ƙirar ku (alamar ku ba kwafi ba).

3.Good Service: Muna kula da abokan ciniki a matsayin aboki.

4.Good Quality: Muna da tsarin kula da ingancin inganci .Good suna a kasuwa.

5.Fast & Cheap Delivery: Muna da babban rangwame daga mai aikawa (Dogon Kwangila).

6.Kunshin: 1. 500-1000pcs/akwati, 8-16akwatuna/kwali

2. Marufi mai girma: 25kg / kartani.

Aika mana imel WhatsApp: +8613622187012 Email: info@hbsinsun.com

Cikakken Bayani

Tags samfurin

Masu hako kai na hex suna da kan hex wanda soket ko kayan aiki za su iya motsa su. Waɗannan sukurori suna amfani da tip ɗin hako kansu (TEK) don matsa ramukan nasu a cikin ma'aunin ƙarfe 20 zuwa 14. Musamman a cikin itace, zaren su kuma suna haɓaka abu don inganta riƙewa. Girman tukwici don huda karafa masu nauyi, mafi girman lambar TEK. Dangane da girman dunƙule, shugabannin suna ɗaukar direban hex 1/4, 5/16, ko 3/8. Ana amfani da waɗannan sukurori a cikin muhallin waje.
Ɗayan fa'ida na musamman hanya shine babban haske na galvanized saman da juriya mai ƙarfi.

Abu	Hex mai wanki shugaban kai mai hako dunƙule tare da epdm bonded washers
Daidaitawa	DIN, ISO, ANSI, NO-STANDARD
Gama	Zinc plated
Nau'in tuƙi	Shugaban hexagonal
Nau'in rawar soja	#1,#2,#3,#4,#5
Kunshin	Akwatin launi + kartani; Girma a cikin jaka 25kg; Kananan jakunkuna+ kartani;Ko an tsara su ta buƙatun abokin ciniki

Tsari na musamman da fa'idodin halaye:
1. Galvanized surface, high haske, karfi lalata juriya.
2. High surface tauri bayan carburize tempering.
3. Babban kullewa tare da fasaha mai mahimmanci

Girman Samfura na EPDM Washer Zinc Plated Din 7504 Hex Head Drilling Screws

Hexagon Washer Head hakowa Skrus Zana

Hex Head SDS Self Drilling Screw Tare da zanen Rubber Washer

Nunin Samfur

Hex mai wanki shugaban kai mai hako dunƙule tare da epdm bonded washers

Hex Head Self Drilling Screw

Tare da Black Bonded Washer

Hex Head Self Drilling Screw

Tare da Grey Bonded Washer

Yellow Zinc Hex Head Drilling Screw

Tare da Black Bonded Washer

Aikace-aikacen samfur na EPDM mai wanki zinc plated din 7504 hex head patta kai sukurori

EPDM Washer Zinc Plated Din 7504 Hex Head Drilling Screws

Hex Head-Screw Screws sun dace da ɗaure madauri, abubuwan da aka gyara, sutura, da sassan ƙarfe zuwa ƙarfe. Wurin hakowa kai da zaren ba tare da buƙatar ramin matukin jirgi ba, tare da kan hex don sauri da amintaccen ɗaure cikin ƙarfe.

Haɗin # 3 tare da Blackdeks EPDM Washer Hardened

Hex Flange Head-Hano kai Tek Screw tare da Wanke don Amfani da Karfe ko Rufaffiyar

Muna saduwa da manyan ma'aikatan da ke aiki don bitar kafin samarwa bayan an tabbatar da oda.

Bincika fasaha da abubuwan fasaha don tabbatar da cewa komai yana cikin tsari.

1. Bayan isowa, duba duk kayan don tabbatar da sun dace da bukatun abokan ciniki.

2. Bincika samfuran matsakaici.

3. Tabbatar da ingancin Intanet

4. Sarrafa ingancin abubuwa na ƙarshe

5. Dubawa na ƙarshe lokacin da ake tattara kayan. Idan babu wasu batutuwa a wannan lokacin,

QC ɗinmu za ta bayar da rahoton dubawa da sakin jigilar kaya.

6. Muna kula da kayan ku a hankali lokacin da ake jigilar su. Akwatunan na iya jure tasirin gama gari yayin sarrafawa da jigilar kaya.

Bidiyon Samfura

FAQ

Tambaya: Yaushe zan iya samun takardar magana?

A: Our tallace-tallace tawagar za su yi zance a cikin 24 hours, idan kun yi sauri, za ka iya kira mu ko tuntube mu online, za mu yi zance a gare ku asap.

Tambaya: Ta yaya zan iya samun samfurin don duba ingancin ku?

A: Za mu iya bayar da samfurin for free, amma yawanci sufurin kaya ne a abokan ciniki gefen, amma kudin za a iya maida daga girma domin biya

Tambaya: Za mu iya buga tambarin kanmu?

A: Ee, muna da ƙwararrun ƙira ƙungiyar wanda sabis a gare ku, za mu iya ƙara your logo a kan kunshin

Tambaya: Yaya tsawon lokacin isar ku?

A: Gabaɗaya kusan kwanaki 30 ne bisa ga odar ku qty na abubuwa

Tambaya: Kai kamfani ne na masana'anta ko kamfani na kasuwanci?

A: Mu ne fiye da shekaru 15 masu sana'a fasteners masana'antu da kuma samun fitarwa kwarewa fiye da 12 shekaru.

Tambaya: Menene lokacin biyan ku?

A: Gabaɗaya, 30% T / T a gaba, ma'auni kafin jigilar kaya ko akan kwafin B / L.

Tambaya: Menene lokacin biyan ku?

A: Gabaɗaya, 30% T / T a gaba, ma'auni kafin jigilar kaya ko akan kwafin B / L.