Zinc Plated Modified Truss Self-Drilling Screw
Bayanin Samfura na ZINC PLATED PHILLIPS KYAUTA TRUSS KAI YANZU DA KAI
The modified truss head Drlling screws wanda kuma ake kira Wafer Head Screws suna da Layer biyu sanyi ƙirƙira babban truss kai kuma ko da yaushe a Philips #2 drive (gicciye hutu). Girman shine yawanci 4.2 * 13, yana da girman girmansa na yau da kullun da ake amfani dashi don yin rawar jiki akan abubuwa masu wuya kamar karfen takarda tare da maki mai kaifi ko wurin hakowa. An yi shi da karfe AISI C1022 kuma mai zafi tare da murfin zinc wanda ke da kyakkyawan aikin hakowa. Canjin kan truss kuma ana kiransa wafer head.
Girman Samfur na Phillips Gyaran Truss Head Screws
Nunin Samfur
Zinc Plated Phillips Gyaran Truss Head
Kai Hakowa Screws
4.2 x 13mm Kai Hakowa Wafer Head ScrewJumla
Phillips ya gyara truss kan hako kansa
tek dunƙule zinc-plated karfe
Bidiyon Samfura
Aikace-aikacen Wafer shugaban sukulan haƙowa kai tsaye
Phillips modified truss head drilling screws yana ƙunshe da motar Phillips da kuma haƙon kai (TEK) don huda ta ƙarfe ma'auni 20 zuwa 14. Zaren da ke kan waɗannan dunƙule suma suna yanke zaren nasu zuwa ko dai itace, filastik ko ƙarfe. Phillips wanda aka gyara truss kai sukulan yana da wani kan da ya wuce kima tare da flange, mai kama da mai wanki. Gyaran kai sukulan suna da digiri 100 da aka yanke wanda ke haifar da wani yanki mafi girma a ƙarƙashin kan dunƙule don wani babban fili mai ɗaukar nauyi.
Gyaran Farar Zinc Plated Truss Head
Screws don tashar C
#8 X 2" KYAUTAR RUSSUN KASAR SCREEN
Drilling Kai Gyaran Truss Head Phillips Zinc
Bidiyon Samfura
FAQ
Tambaya: Yaushe zan iya samun takardar magana?
A: Our tallace-tallace tawagar za su yi zance a cikin 24 hours, idan kun yi sauri, za ka iya kira mu ko tuntube mu online, za mu yi zance a gare ku asap.
Tambaya: Ta yaya zan iya samun samfurin don duba ingancin ku?
A: Za mu iya bayar da samfurin for free, amma yawanci sufurin kaya ne a abokan ciniki gefen, amma kudin za a iya maida daga girma domin biya
Tambaya: Za mu iya buga tambarin kanmu?
A: Ee, muna da ƙwararrun ƙira ƙungiyar wanda sabis a gare ku, za mu iya ƙara your logo a kan kunshin
Tambaya: Yaya tsawon lokacin isar ku?
A: Gabaɗaya kusan kwanaki 30 ne bisa ga odar ku qty na abubuwa
Tambaya: Kai kamfani ne na masana'anta ko kamfani na kasuwanci?
A: Mu ne fiye da shekaru 15 masu sana'a fasteners masana'antu da kuma samun fitarwa kwarewa fiye da 12 shekaru.
Tambaya: Menene lokacin biyan ku?
A: Gabaɗaya, 30% T / T a gaba, ma'auni kafin jigilar kaya ko akan kwafin B / L.
Tambaya: Menene lokacin biyan ku?
A: Gabaɗaya, 30% T / T a gaba, ma'auni kafin jigilar kaya ko akan kwafin B / L.
