Zinc Plated Modified Truss Self-Drilling Screw

Inkcazelo emfutshane:

Phillips Modified Truss Head Self-Drilling Screws Zinc Plated

● Igama: Phillips wafer intloko self-drilling izikrufu C1022 steel modified truss head screw

● Izinto eziphathekayo: ICarbon C1022 Steel, Case Harden

● Uhlobo lweNtloko: I-Wafer / Truss headhead

● Uhlobo loMsonto: intambo epheleleyo, intambo engaphelelanga

● Ikhefu:IiPhilips okanye ikhefu

● Umphezulu wokuGqibela:Iphosphate emnyama/engwevu, i-zinc emhlophe/etyheli epleyitiweyo ,Nickel

●Ububanzi:7#(3.9mm),8#(4.2mm),10#(4.8mm)

● Inqaku:Zomba okanye ubukhali

● Umgangatho:DIN 7504 T

● Non-standard:OEM iyafumaneka ukuba unika imizobo okanye iisampuli.

● Umthamo wokubonelela: iitoni ezingama-80-100 ngosuku

●Ukupakisha:Ibhokisi encinci, isambuku kwibhokisi okanye iibhegi,ipolybag okanye isicelo soMthengi

 


  • facebook
  • linkedin
  • twitter
  • youtube

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intloko yetruss self-drilling tapping screw
velisa

Inkcazo yeMveliso yeZINC PLATED PHILLIPS MODIDIFIED TRUSS HEAD SELF DILLING SCREWS

I-truss elungisiweyo yentloko ye-self drlling screws ekwabizwa ngokuba yi-Wafer Head Screws inomaleko emibini ebandayo eyakhiwe intloko ye-truss enkulu kwaye ihlala iku-philips #2 drive (ikhefu elinqamlezayo). Ubungakanani buqhele ukuba yi-4.2*13, yiholeyili yeesayizi eziqhelekileyo Isetyenziselwa ukugrumba kwizinto eziqinileyo ezifana neishidi lesinyithi elinendawo ebukhali okanye indawo yokomba. Yenziwe ngentsimbi ye-AISI C1022 kwaye ifudunyezwe nge-zinc coating enomsebenzi ogqwesileyo wokuqhuba. Intloko yetruss elungisiweyo ikwabizwa ngokuba yi wafer head.

Ubungakanani beMveliso yePhillips eGuquliweyo yeTruss yeNtloko yeSelf Drilling Screws

Umboniso weMveliso

Round Wafer Phillips Truss Head Self Drilling Screws

      Zinc Plated Phillips Modified Truss Head

Self Drilling Screws

 

Intloko yeTruss uPhillips Uzikrwelela izikrulu zokuzibhobhoza zeMatel Materials

     4.2 x 13mm Self Drilling Wafer Head ScrewIhoyilesi

 

Truss Head Self-Drilling Screw

     Phillips iguqulelwe truss intloko self-drilling

tek screw zinc-plated intsimbi

 

Ividiyo yeMveliso

Ukusetyenziswa kwe-Wafer head self-drilling screws

Izikrufu ze-Phillips ezitshintshiweyo ze-truss zentloko ye-self-drilling zibandakanya i-Phillips drive kunye ne-self-drilling (TEK) indawo yokugqobhoza ngama-20 ukuya kwi-14 geji yesinyithi. Imisonto kwezi zikrufu ikwasikela eyayo imisonto ibe ngamaplanga, iplastiki okanye isinyithi samaphepha. Izikrufu zentloko ye-truss ezilungisiweyo zikaPhillips zinentloko enobukhulu obungaphezulu eneflange, efana newasha edibeneyo. Izikrufu zentloko yetruss ezilungisiweyo zine-100 degree undercut eyenza indawo enkulu ngaphantsi kwentloko yesikrufu kwindawo enkulu yokuthwala.

I-wafer head self-drilling screw
2
Self Drilling Screw SDS #8

Intloko yeTruss yeZinc eGuquliweyo eMhlophe

Izikrufu zetshaneli C

#8 X 2" ISIKRHULU SENTLOKO ESILUNGISIWEYO

Self Drilling Modified Truss Head Phillips Zinc

Ividiyo yeMveliso

FAQ

Umbuzo: Ndingalifumana nini iphepha locaphulo?

A: Iqela lethu lokuthengisa liya kwenza ikowuti kwiiyure ezingama-24, ukuba ungxamile, ungasitsalela umnxeba okanye uqhagamshelane nathi kwi-Intanethi, siya kukwenzela ikowuti ngokukhawuleza.

Umbuzo: Ndingayifumana njani isampuli ukujonga umgangatho wakho?

A: Singanikezela ngesampulu simahla, kodwa ngokuqhelekileyo imithwalo isecaleni labathengi, kodwa iindleko zinokubuyiselwa kwintlawulo ye-odolo eninzi.

Umbuzo: Ngaba sinokuprinta ilogo yethu?

A: Ewe, sineqela loyilo lobuchwephesha elinikezela inkonzo yakho, sinokongeza uphawu lwakho kwiphakheji yakho

Umbuzo: Lingakanani ixesha lakho lokuhambisa?

A: Ngokuqhelekileyo malunga neentsuku ze-30 ngokuhambelana ne-odolo yakho yezinto

Umbuzo: Uyinkampani eyenza izinto okanye inkampani yokurhweba?

A: Singaphezulu kweminyaka eli-15 yokuvelisa iziqhoboshi zobuchwephesha kwaye sinamava okuthumela kumazwe angaphandle ngaphezulu kweminyaka eli-12.

Umbuzo: Lithini ixesha lakho lokuhlawula?

A: Ngokubanzi, i-30% T / T kwangaphambili, ibhalansi ngaphambi kokuthunyelwa okanye ngokuchasene nekopi ye-B / L.

Umbuzo: Lithini ixesha lakho lokuhlawula?

A: Ngokubanzi, i-30% T / T kwangaphambili, ibhalansi ngaphambi kokuthunyelwa okanye ngokuchasene nekopi ye-B / L.


  • Ngaphambili:
  • Okulandelayo: